Certificate III in Engineering - Production Systems - MEM30119

Federation TAFE

This qualification defines the skills and knowledge required of an engineering/manufacturing employee within metal, engineering, manufacturing and associated industries.The skills associated with this qualification are intended to apply to a wide range of engineering/manufacturing work including production, distribution, stores and warehousing. It provides the skills and knowledge for a person to understand and apply quality control techniques, exercise good interpersonal and communications skills, work from complex instructions and procedures, exercise discretion within the scope of responsibility, perform work under limited supervision either individually or in a team environment, be responsible for assuring the quality of their own work, perform work which, while primarily involving the skills of the employee\u2019s qualification, is incidental or peripheral to the primary task and facilitate the completion of the whole task, inspect products and/or materials for conformity with established operational standards and assists in the provision of on-the-job training of other workers.This qualification is designed to provide an industry recognised skills profile related to production work as an Engineering/ Manufacturing Employee - Level V. Competency development would typically be undertaken through an Australian Apprenticeships arrangement where the integration of on and off-the-job training would be specified in the Training Plan associated with the Contract of Training between the employer and trainee.Assessment of some units of competency must, where indicated, include evidence of the candidate's performance in a functioning workplace where there is a sufficient range of appropriate tasks and/or materials to cover the scope of application of those units. All outcomes must reflect the standard of performance required of the work associates with the Unit/s.This qualification is not suited and should not be used for people who are not employed in an engineering production or manufacturing environment. It is not suited and should not be used for school students unless they are formally engaged in a traineeship in accordance with the Australian Apprenticeships policy.No licensing, legislative or certification requirements apply to this qualification at the time of publication. However, in some jurisdictions units in this qualification may relate to licensing or regulatory requirements. Local regulations should be checked.

Entry Requirements:

There are no entry requirements for this qualification.

Subjects you can Study:

Operate a bridge and gantry crane; Perform advanced press operations; Organise and communicate information; Manage warehouse inventory system; Test, recover, evacuate and charge refrigeration systems; Perform sheet and plate assembly; Dismantle, replace and assemble engineering components; Perform complex machine setting; Perform inspection; Perform general woodworking machine operations; Set and edit computer controlled machines and processes; Perform complex metal spinning lathe operations; Work safely with industrial chemicals and materials; Perform basic magnetic particle testing; Manufacture fluid conveying conductor assemblies; Prepare surfaces using solvents and/or mechanical means; Monitor quality of production welding/fabrications; Perform manual heating and thermal cutting; Electroplate engineering coatings; Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity); Undertake basic rigging; Implement and monitor environmentally sustainable work practices; Perform advanced plastic processing; Perform basic statistical quality control; Operate and control surface finishing waste treatment process; Perform manual production welding; Carry out heat treatment; Erect/dismantle scaffolding and equipment; Perform operational maintenance of machines/equipment; Test a new aluminium extrusion die; Perform electroplating operations; Plan work activities; Administer inventory procedures; Rework and repair (electrical/electronic production); Licence to erect, alter and dismantle scaffolding basic level; Operate computer controlled machines and processes; Select welding processes; Undertake dogging; Operate pressure die casting machine; Perform advanced machine and process operation; Electroplate decorative finishes; Operate as a team member to conduct manufacturing, engineering or related activities; Undertake corrections and basic maintenance to aluminium extrusion dies and die support systems; Perform aluminothermic welding; Operate and monitor basic boiler; Terminate and connect electrical wiring; Operate equipment using pre-preg material; Prepare and mix sand for metal moulding; Make up solutions; Terminate signal and data cables; Erect/dismantle intermediate scaffolding and equipment; Produce composites using pre-pregs; Participate in environmentally sustainable work practices; Purchase materials; Operate mobile load shifting equipment; Perform routine machine setting; Order materials; Perform basic penetrant testing; Apply protective coatings (advanced); Operate and monitor machine and process; Control blast coating by-products, materials and emissions; Perform routine sharpening and maintenance of production tools and cutters; Set multistage integrated processes; Handle fluorocarbon refrigerants according to regulations; Perform gravity die casting; Produce clear and/or coloured and/or sealed anodised films on aluminium; Use workshop machines for basic operations; Perform wire, jig and barrel load/unload work; Undertake work health and safety activities in the workplace; Identify causes of faulty aluminium extrusions; Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above); Apply safe welding practices; Licence to erect, alter and dismantle scaffolding intermediate level; Operate resin transfer moulding equipment; Perform production machining; Perform hand forging; Pick and process order; Use improvement processes in team activities; Operate sand moulding and core making machines; Carry out mechanical cutting; Weld using oxy fuel gas welding process; Select and control inspection processes and procedures; Connect and disconnect fluid conveying system components; Perform electronic/electrical assembly (production); Use power tools/hand held operations; Perform manual production assembly; Operate a non-slewing mobile crane of greater than three tonnes capacity; Licence to perform dogging; Pre-treat work for subsequent surface coating; Package materials (stores and warehouse); Perform brazing and/or silver soldering; Organise and lead stocktakes; Produce composites using resin transfer moulding; Work safely with ionizing radiation; Repair springs; Perform advanced operation of load shifting equipment; Perform production packaging; Perform emergency first aid; Electroplate protective finishes; Perform soft soldering; Perform high reliability soldering and desoldering; Use hand tools; Perform refractory installation and repair; Perform automated thermal cutting; Perform basic metal spinning lathe operations; Perform routine manual metal arc welding; Pour molten metal; Use graphical techniques and perform simple statistical computations; Licence to operate an order picking forklift truck; Control surface finish production and finished product quality; Licence to operate a bridge and gantry crane; Commission and decommission split air conditioning systems; Enter and change programmable controller operational parameters; Manually finish/polish materials; Perform basic incidental heat/quenching, tempering and annealing; Licence to perform rigging basic level; Licence to operate a forklift truck; Set and operate coordinate measuring machines; Perform routine gas metal arc welding; Perform computations; Use comparison and basic measuring devices; Undertake warehouse receival process; Apply protective coatings (basic); Finish work using wet, dry and vapour deposition methods; Organise and maintain warehouse stock receival and dispatch system; Prepare and produce specialised coatings; Work safely and effectively in manufacturing and engineering; Perform advanced warehouse computer operations; Use tools for precision work; Perform routine oxy fuel gas welding; Perform electrical/electronic measurement; Perform internal/external customer service; Perform manual soldering/desoldering – electrical/electronic components; Undertake tool store procedures; Set and edit computer controlled thermal cutting machines; Operate melting furnaces; Operate fixed/moveable load shifting equipment; Perform precision assembly; Interact with computing technology; Set computer controlled machines and processes; Operate resin infusion moulding equipment; Weld using flame powder spraying; Install split air conditioning systems and associated pipework; Undertake warehouse dispatch process; Produce composites using resin infusion; Undertake manual handling; Terminate and connect specialist cables; Perform routine gas tungsten arc welding; Prepare to perform work associated with fuel system installation and servicing; Work safely with molten metals/glass; Perform engineering measurements; Set assembly stations; Assist in the provision of on-the-job training; Prepare surfaces by abrasive blasting (basic); Fettle and trim metal castings/forgings; Prepare surfaces by abrasive blasting (advanced); Interpret technical drawing; Measure components using coordinate measuring machines; Handle/move bulk fluids/gases; Coordinate erection/dismantling of complex scaffolding/equipment

Campus Mid Year Intake Study Mode Duration
Wendouree (Rural Science)
Mount Helen (Ballarat)
Mount Rowan (Rural Science)
SMB (Ballarat)
Wimmera (Horsham)
Camp Street (Ballarat)
Gippsland (Churchill)
Berwick
Brisbane

FedUni TAFE offers a broad range of quality education and training programs that delivers skilled workers to industries including automotive, building and construction, manufacturing, engineering, business, IT, graphic design, food services, agriculture, nursing, hairdressing, beauty therapy, community and children’s services.

Great career opportunities

Trades and traditional ‘blue collar’ careers have fast become a lucrative career option – with many out-earning some of the professional ‘white collar’ qualifications once considered to be the big money makers (think doctors, management, lawyers, accountants). Becoming a master of your trade can open your future career opportunities to a level you never thought possible.

Great teachers

Our teachers have worked in industry, and understand what it takes to become a successful tradesperson or professional. They have been apprentices and know what it’s like to be starting out in the industry.

Great facilities

State-of-the-art trade training facilities include the Building and Construction Training Centre which houses our construction trades; fully operating commercial kitchens, hairdressing, and beauty salons; as well as the Rural Sciences Skills Centre – home to our Agriculture, Horticulture and Conservation & Land Management programs; and the new Manufacturing Engineering Skills Centre.

Great industry contacts

As our teachers have industry experience and because FedUni has a long history in the trade training business, we have close ties with local industries and businesses. This results in a very high placement rate of apprentices and graduates with local companies.

Great range of programs

We offer a wide range of quality TAFE vocational education and training courses, with a focus on apprenticeship and skills training. We are also home to Federation College, offering a range of VET and preparatory courses for those looking for alternative options for completing their education. We offer Certificates, Diplomas and Advanced Diplomas. Which course you do will depend on your background, education level and interests. Each program in this guide lists its entry requirements and how to apply. Programs which are listed as Apprenticeships or Traineeships require that you are employed in the relevant industry and have a training agreement with your employer.

Is the information on this page correct? Request update

Request Information
Enquire about this course

Related courses
NSW
VIC
WA
QLD
TAS
SA
NT
ACT