Certificate III in Telecommunications Network Build and Operation - ICT30419

JB Hunter

This qualification is for telecommunications operators working on the construction and maintenance of high-speed national broadband network (NBN) infrastructure, and on required technology.Telecommunications technology operators may:perform equipment and system installation work on a customer network to enable efficient access and interconnection to the NBN services, including connecting and jointing of copper cable, diagnosing and rectifying copper cable system faults, and migrating, remediating and augmentation of copper services to maximise benefits of the high-speed broadband connectionsplice, test and fault-find on live fibre cable in the NBN fibre distribution networkperform equipment and system installation work on a customer network to enable efficient access and interconnection to the NBN services, including diagnosing and rectifying fibre system faults, working with active equipment, and performing integration and commissioning activities to maximise benefits of the high-speed broadband connectionperform underground and aerial equipment and system installations from the tap to the optical node to enable efficient access and interconnection to the NBN services, including connecting and terminating hybrid fibre coaxial (HFC) cabling, diagnosing and rectifying HFC system faultsinstall, activate and assure HFC equipment and systems from the last connection point of the network to the customer premises \u2013 tap to network termination device (NTD) \u2013 to enable efficient access and interconnection to the NBN services. Licensing/Regulatory Information Work functions in the occupational areas where this qualification may be used are subject to regulatory requirements. Refer to the ICT Information and Communications Technology Training Package Companion Volume Implementation Guide or the relevant regulator for details of licensing, legislative or certification requirements. Cabling at the customer premises downstream of the NTD must be carried out according to requirements of the Australian Communications and Media Authority (ACMA) and relevant industry registration bodies, and in line with the specifications of the access network owner.

Entry Requirements:

Nil

Subjects you can Study:

Splice and terminate optical fibre cable for telecommunications projects; Determine and apply technologies within a telecommunications system; Jumper metallic conductor cable in the access network; Haul underground cable for installation and maintenance work; Remove non-friable asbestos; Identify, locate and protect underground services; Work on and resolve recurrent network faults; Supervise worksite activities; Install a complex digital reception system; Provide cardiopulmonary resuscitation; Enter and work in confined spaces; Modify and cutover cable; Maintain hybrid fibre coaxial broadband cable network; Use radio frequency measuring instruments; Install a cable broadband multi-dwelling unit system; Install aerial cable for communications applications; Implement traffic management plan; Work safely on live optical fibre installations; Operate a forklift; Remove and replace electronic circuit boards in carrier equipment; Participate in environmentally sustainable work practices; Follow work health and safety and environmental policy and procedures; Install optical fibre splitters in fibre distribution hubs; Install, test and terminate optical fibre cable on customer premises; Work safely near power infrastructure at a telecommunications workplace; Install, configure and test an internet protocol network; Locate, identify and rectify telecommunications network faults; Locate and identify cable system faults; Install and test internet protocol devices in convergence networks; Install and cut over metallic conductor cable to access network cabinet; Commission an electronic system; Carry out WHS requirements; Provide telecommunications services safely on roofs; Use electrical skills when working with telecommunications networks; Install, maintain and modify customer premises communications cabling: ACMA Restricted Rule; Use hand and power tools; Install and terminate coaxial cable; Install and terminate hard-line coaxial cable; Perform tests on optical communication system and components; Install lead-in module and cable for fibre to the premises; Locate, identify and rectify copper cable faults; Install underground cable for communications applications; Work effectively in the digital and telecommunications industry; Joint metallic conductor cable in access network; Install telecommunications network equipment; Use explosive power tools; Install ribbon fibre cable in the FTTX distribution network; Working safely near live electrical apparatus as a non-electrical worker; Install, maintain and modify customer premises communications cabling: ACMA Open Rule; Implement and monitor environmentally sustainable work practices; Use optical measuring instruments; Design communications wiring systems for customer premises; Rearrange large size copper cable; Cut over metallic conductor cable in the access network; Apply WHS requirements, policies and procedures in the construction industry; Install underground enclosures and conduit; Work safely in the construction industry; Install aerial and underground cable lead-ins; Inspect, clean and handle optical fibre cable and connectors; Work safely at heights; Provide customer service to telecommunications customers; Control traffic with stop-slow bat; Construct aerial cable supports

Related Careers:

Electrician,
Campus Mid Year Intake Study Mode Duration
North Rockhampton
Curtin
Cairns
Burwood
Maryville - Newcastle - NSW
Port Adelaide
Kellor east - Melbourne - VIC
Jandakot
Welshpool - Perth - WA
Darwin
Casuarina
Brendale - Brisbane - QLD
Burleigh Waters
Townsville
Auburn - Sydney - NSW
Established in 1991, JB Hunter Technology is a Registered Training Organisation that offers training in telecommunications. It specialises in developing and presenting telecommunications training courses with a particular emphasis on customer premises, voice and data services. It delivers training in all Australian states and territories to over fifty thousand clients. Its scope of registration approves the delivery of Nationally Recognised Training from Certificate II, III and IV level to Diploma and Advanced Diploma. The provider takes a flexible approach including Recognition of Prior Learning (RPL), eLearning, work-based and face-to-face training to cater for various learning styles and experience levels. JB Hunter Technology understand that the telecommunications scene in Australia is changing rapidly, particularly with the roll out of the National Broadband Network (NBN). It aims to ensure that its team and resources are in step with the latest technology and industry practice. It keeps track of the shifting demands placed on the telecommunications industry and will tailor training to suit this. The provider aims to provide small business, independent contractors and large organisations with cost effective training that minimises down time and maximises productivity. They also recognise the complex nature of the corporate world. Telstra, ISGM, Visionstream, 3M, NBN Co, TE Connectivity, and the Department of Defence are just some of the organisations that recognise its training. Course instructors are experienced industry practitioners. Clients include various government departments at all levels, and private businesses covering the complete spectrum of telecommunications, security and fire alarm.

Is the information on this page correct? Request update

Request Information
Enquire about this course

Related courses
VIC
SA
QLD
NSW
TAS
WA
ACT
NT