Professional Certificate of Competency in Electrical Power System Protection
Engineering Institute of Technology
Type of institution: Registered Training Organisation
Level: Pre-degree
CRICOS: 03567C
Any power system is prone to ‘faults’ (also called short-circuits), which occur mostly as a result of insulation failure and sometimes due to external causes. When a fault occurs, the normal functioning of the system gets disturbed. The high current resulting from a fault can stress the electrical conductors and connected equipment thermally and electro-dynamically.Arcs at the fault point can cause serious or even fatal burn injuries to operating and maintenance workers in the vicinity. Faults involving one phase and ground give rise to high ‘touch’ and ‘step’ voltages, posing the danger of electrocution to personnel working nearby.It is, therefore, necessary to detect and clear any fault quickly. The first device used in early electrical systems was the fuse, which acted both as the sensor and the interrupting device. With larger systems, separate devices have become necessary to sense and interrupt fault currentsIn both high voltage systems and low voltage systems of higher capacities, the sensing is done by more sophisticated devices called relays. Relays were initially electro-mechanical devices, but static relays, and more recently, digital relays, have become the norm. With more complex systems, it is necessary to detect the point of fault precisely and trip only those sections affected by the fault, while the rest of the system can continue to function normally.
Standard entry requirements
To obtain a certificate of completion for EIT’s Professional Certificate of Competency course, students must achieve a 65% attendance rate at the live, online weekly webinars. Detailed summaries or notes can be submitted in lieu of attendance. In addition, students must obtain an overall 50% marks in the set assessments which are a practical assessment and a proctored exam. Students must obtain a minimum 40% marks in proctored exam to pass this course. Students must also obtain a mark of 100% in weekly quizzes. If a student does not achieve the required score, resubmission/re-attempt opportunity is given only in the practical assessment and the weekly quizzes, not in the exam.
Study information
| Campus | Fees | Entry | Mid year intake | Attendance |
|---|---|---|---|---|
| EIT ONLINE | No |
|
